Search results

White paint

So need the drivers door seal rubber cut snd shut . Well thats what I thought., it's a qick fix. Yer right. so quickly fix! No all day. So let's make it cleanso now prime now paint white ho thats sorted.

So need the drivers door seal rubber cut snd shut . Well thats what I thought., it's a qick fix. Yer right. so quickly fix! No all day. So let's make it cleanso now prime noe paint white ho thats tomorrow

I've done the same as humble road on one of his builds ! Just put A REMOVEABLE step for r passengers side seat to save weight. Also I used that 5mm acoustic floor stuff from ebay (as pic above) as the vaper barrier, insted of the silver bubble stuff

I love you lot thanks for all your time guys More bits are arriving befor Christmas.

12 volt wires are like 70 mm at 500 amps 24 are upto 50% less for the same amps. I was going 24v but the fridge is 12v

Could you not just put it in a vice ? The hammer type. Ill call you again if you dont mine after lunch sir

Is the wire to shunt 70mm at £12 £13 a meter. ..? What wire size for the inverter @5k .? 70 mm again if 12v. 3mx2 red black for inverter and 1m bat to shunt black so 7m and six lugs. Or should I have equivalent length ! from battery or shunt is the question.

Edmondson said rent 20 if I do it at the shop £ 10. Boths better than buying a soldering iron plus blow touch gas at £18 from screw fix just gas

I've been driving around with the sprinters battery bay open in the van , so loud , so do the cab aswell. The only thing I've yet to decide is bonnet and front wings. But still got a couple of meters left of both

This is another ouch ouch ouch for the same stuff

So went back to shopping today avoiding the zz top man.. found edmundson electrical got lugs inbags of10. Then got told they hire out there crimp tool 20 per day then went on to Hickleys and they sold lugs in singles. Then come home to your posts and now found a lot less £ at So going to be...

So sobering up now ! Found the cable but also found some solar cable as photos us this any good for b2b ? 40amps The other wire pics are for shunt to inverter

Thanks guys out again tomorrow. Scappy just sent batteries and copper in last week. But 16mm lugs but no less than 10mm. For b2b. The smart shunt makes the battery to high for boxing. so have to put a L bracket and hang it of the side or end if it needs to be on battery.

Yep upgraded from the old bus bar, new one now fitted. So these wires should be tinted or ferrules. Ok So i need solding irons. Torch and chisle. 30w and or adjustable where to buy? Need asap the m8 smart shunt will be upto 3M meters from battery, found some old wire from a lorry jump...

The inverter go's straight to the smart shunt m8 bolt not via the fuse box.this is for the fuse box to smart shunt. If I said 70 amp ?

12 fuses max 10 amp total 120 amps with all on at one time won't happen when I'm in the van but the girls don't turn anything off.

Victron uses screws.

It's shit galvanising and once cut I found less than a year on the sprinter painted parts are rusting. knocked the rear reversing camera off with a low hanging branch while reversing in a bay ! Och. So up step ladder took bolts out and the rim of the hole had 5mm rust arond the in parts the...

So got 12 spade fuse holder for lives and the vans twin wire all round. I'll need a earth block for 12 earths, found this in tool station ! Will it take 120 amps ? For 30 minutes.