Search results

As promised these are photos of double swivel seat from a VW (Not sure which model) sat on a box framed base that I welded up encased in decorative ply all mounted on front plates over inside floor and rear plates under the floor pan. The seat itself can as seen swivel 180deg and locks into...

I'm here on holiday with him and his family at Llangennith I'll take some photos later when their three year old wakes up from her afternoon knap 😁. Phil P.s. Its actually swivelling so has a 180 deg position though only locks into travelling position at forward and rear ward positions.

Bloody hell Robbo, that is a massive job but the end result looks fab bet your proud of it. We'll done and a great effort 👌. Phil

When you get the bonding kit cut off the spike on the plastic nozzle, hold the gun/nozzle at 90 deg to the bodywork and so that the "V" of the nozzle leaves a high triangle continously around the window aperture, try to complete it in one go, it's very difficult to do it in one go but try to...

You get the primer with the bonding kit along with the application bud on a stick. The primer is also an anti corrosion fluid too. You must follow the instructions that comes with the kit. Phil P.s. The primer can be used on bare metal to stop corrosion.

This is all you will need to bond the window just follow the instructions to the letter. Phil

I fitted a double swivel seat into my sons 2015 Peugeot Boxer about two years ago. This seat had seat belts fitted to the seat frame so seat belt mountings were not required. I mounted it on a frame that I welded up and drilled down through the floor and used mild steel plates to strengthen...

I've found that the best way is to get an old kitchen knive and sharpen the blade well, on an oil stone preferably. Then using leather gardening gloves use the knife like a spoke shave and gradually slice the excess bonding agent away from the bodywork. Then work on the glass in a similar way...

Hi Mark, well I've done about 600 miles since the problem righted itself so fingers crossed what ever caused it was a one off. 🤷‍♂️. Phil

Upholstery has arrived and I've just finished the blinds. 😁.Phil

As promised a few photos of the carpeted back doors and the blinds casettes, I'll be finishing the fitting of the other blinds tomorrow. Phil

I thought I'd put up some photos of the tile edging I use to hide the carpet edges and gives the carpet a nice straight edge finish. I've carpeted the rear doors today and will post the results tomorrow. Phil

Great job, looks the part, paint job like that is a Labour of love. Phil

It's things I have taught myself over the years Squirrell, mainly patients and trial and error, usually error 😄. I have always been of the argument that if someone else can do it so can I 🙂. This present build has taken me almost 4 months at nearly full time and I reckon I've still got a month...

These are cassettes I've made to house the eco blinds. These take alot of care and time to produce but really worth the effort for a professional appearance to house the blinds and stop them hanging away from the wall plus stops them from flopping about and rattling while travelling the last...

Just rear doors to carpet and then onto eye level lockers. Phil

As an aside to carpeting, that is stretch carpeting, those who have Done this will I'm sure agree that it is not a quick or easy job on a build. In my post you will see where I have carpeted around the o/s opening window down to the long day bed, to do this properly and with a professional...

Few photos of continuation of build, started on the carpeting and upholster has arrived to initial fit seat/bed foam. Sis in law has been using it over the last few weeks on long weekends and I've had a bad cold over the last week so progess is a little slower than I had hoped.

If the boards do not need to be removable then I would as I have always done stuck the ceiling board up with evo stick "Sticks like shit". Believe me once it has gone off you could physically hang your body weight from the ceiling. All that is needed is blocks stuck to the roof or roof...

Well Mark, your correct ofcourse that nagging doubt has been on my mind but I've now had three outings since the problem solved itself,consisting of over 50miles each time and various reverse gear use and it's still working fine. I have no idea why this happened as reverse gear in the box is a...