Search results

Mine is on log book motorcaravan.

Stay away from fords, apart from crap mechanics the blighters get nicked 24/7

You will be right cold and condensation with all them single glasse windows, first thing I would have disposed of and sheeted in, does in my eye look like a bus.

Always put a few extra wires in to different places as almost always you will require an add on for something down the line.

Most epoxy resins if it is dont work under 6c, best leave a floor to hotter weather to make sure timber is dry.

How are you going to get from the cab to the living qtrs or viceversa.

Yes street charging can be a bu--er for many, I'm lucky in that respect.

Why dont you fit a built in smart charger with a outside charge plug point.

Waste of time using single pack red oxide, best to clean back to white metal and use a zink rich 2 pack epoxy.

Best plan is to strip all out and start fresh before a rebuild to camper.

Floor ply is best coated in fibre glass both sides and edges, resin board is much better. Do remember to have all wiring runs sorted and in place at the start, think solar is a must.

Chopping wood is the second source of heat. 😂

People been talking about baked beans and my wind problem again. :eek:

Yes for biz, but they are now clamping down on homes here and there, once one or two get caught burning non defra approved wood the word will get out and frighten others, yet my builders merchant still sell bags of cutting but under the counter if you get my drift. ;)

Take it you use 2 packs, i do remember the old days of cellulose in the car trade, all my work was industrial but we did do m cycle frames and fireplaces, 10 thu with one wet coat, did you ever use an airless with 3000psi at the tip, very dangerous in the wrong hands.

Tried devilbus, total sh-t in an industrial workshop, also poor adjustment of air and a poor spring for heavy epoxy zink rich two packs.

Good idea to put some antifreeze down drains if there is a u bend.

All petrol stations sell it here at pump or in 20ltr drums.

Should have bought yourself a proper gun, suction guns went out with Nelsons eye, binks 630 me lad or iwata. 😂

Old oil no use as jets block, drip fed burners are best, but be warned council told my mate to stop using one in his workshop or face a very large fine.