Search results

Don’t suppose the dimensions of the separator lend itself to fitting inside a thetford swivel?

Well dont know about members here but I know a few folks with composting toilets, wee goes in the hedge and solids in a bag in a bin. Not sure there is any more risk to health whichever method you use as they both have to be emptied out.

Think I will look more at these when my thetford gives up the ghost. Problem i see though is ours is a swivel bowl, not sure how much of a problem a fixed unit would be, think it would need bathroom redesign and moving sink as well

Have a look here, I used to buy my stuff from them online. I think they used to have some videos showing how to do some stuff https://www.ecfibreglasssupplies.co.uk/

You can bond to fibreglass using resin and either chopped or woven matting. Does depend what you want to fit though

Any reason why you don’t want to use resin and matting?

Kildwick prices not bad though I don’t think

Is this not a good use of your rpi?

Two temperature sensors, one for mains charger one for B2B. That’s what I did. Not got anything for the solar as worked on the theory of its below 5 degrees it isn’t going to give me more than 10 amp charge

There is some i for on Sprinter doors here http://www.diysprinter.co.uk/reference/

Mine only gets turned off when I defrost it

This may be better in WC forum as unlikely to find one on a conversion methinks 👍

Has anyone come across a source for one of these units (pics below)? My electric step has stopped working and it’s looking like it may be the relay, tracked it back today and it’s not a simple relay. Seems I am missing a remote fob lol

So worse case if it didn’t work I have bought a slightly bigger control than I needed and wasted a cheap psu and selector switch, £25 or so? Think that may be worth a punt but will just wait and see if anyone else has some ideas. I like lateral thinking 👍

My votronic is MPPT, I may be reading it wrong but it says pv Max 20v. Will check my panels and update this post My panels Voc is 22.3 this is my solar controllerMPP 250 Duo Digital...

Let’s see if I have it right, if switching 12/24v not a problem. Go for the Victron 100/30 solar controller, overkill on pu panels but 30 amps mains charge Fit one of the 24v Amazon PSU units connected to solar charger via switch Run 24v psu and single EBL charger (or 24v psu alone if...

Ha ha, that was my thinking with the 250, the days I am losing 50w I have plenty anyway :) the 24v psu wouldn’t work with my votronic, max input of 15v. If I went to a Victron with a selector switch would it not matter my panels are 12v parallel then it suddenly swaps to 24v?

Think I am going senile, don’t know what I was looking at but it said up to 290W of solar, can’t find it now and as you say it states 440. Think I have found it, the /20 on onboard energy site is showing 290W is that wrong? Maximum PV Panels 290W-12V / 580W-24V

I was looking at the 3 output charger thinking to use one output to trickle charge my PowerFrame starter battery. I can save £20 and sort that other ways though. Will have a spare Schaudt 18amp if I parallel the EBL. Was thinking of bypassing the EBL altogether though. Doing that I can ensure...

The Duo would have to run on Gel settings Dave. I motitor my batteries and don’t mind disconnecting the rare times I get hookup, with genny I wouldn’t run long enough to float (30 amp to each battery 60 amp total). No dedicated setting isn’t ideal though. I have used Votronic solar and B2B...