truma regulator stepped olive

Barfly

hi does anyone know which way round the stepped olive should be fitted on a truma regulator ie the shoulder towards the body of the regulator or away from the body.regards aidan
 

Barfly

Depends wether you want it to leak or not .. :scared:

ive noticed that you have made 2,355 posts, i hope that at least one of your posts was more use than your last one.
regards aidan
 

torwood

hi does anyone know which way round the stepped olive should be fitted on a truma regulator ie the shoulder towards the body of the regulator or away from the body.regards aidan

Can't remember which way round but offer the olive up to the regulator body on its own and see which side fits best, I would go with that then once you have sealed it check for leaks, some soapy water brushed on and look for bubbles.
 

Deleted member 2572

The olive fits with the fatter end towards the nut so the thinner part of the olive is pushed into the regulator body , don't over tighten it !
 

Barfly

thank you Charlie your answer makes sense and I will also take the other posts information into account.
Regards aidan
 

Users who viewed this discussion (Total:0)

Top