Latest activity

Looks good for me, I'd think that the suction caused by the ribbed adhesive would be enough to hold it up while it sets, but make sure...

This is what I was looking at to bond it. The walls have been made from buffalo board, so waterproof to start will...

That's exactly what I used Mark, and as I said earlier it's as good now as when I fitted it 11 years ago. One thing I will say is to use...

I was thinking about something like this for Betty, https://www.sheetplastics.co.uk/pvc-cladding-sheets/1-5mm-x-3050mm-x-1220mm-satin Mark

Think you’ll find most of those ‘guests’ are sadly bots.

I used 1.5mm white pvc 2400x1200 hygienic Sheets used for commercial kitchens. Bought off ebay 11 years ago now but still as good as the...

Stainless will bo ok in its self, do vent it for cooling.

Thanks for the reminder! I'm such a scatter brain, I'd likely have forgotten as a result of my enthusiasm to get it done! I think the...

Thanks for the reminder! I'm such a scatter brain, I'd likely have forgotten as a result of my enthusiasm to get it done! I think the...

Dont think liths require venting but a little gap to prevent over heating may be a good idea, also remember on you build never let alloy...

I used 1.5mm white pvc 2400x1200 hygienic Sheets used for commercial kitchens. Bought off ebay 11 years ago now but still as good as the...

I built my toilet wash room in wood and then covered with GRP with a light cream colour mix.

Dont think liths require venting but a little gap to prevent over heating may be a good idea, also remember on you build never let alloy...

I built my toilet wash room in wood and then covered with GRP with a light cream colour mix.

https://tekascrapltd.com/product/aluminium-lithographic-sheets-scrap-1000-series/ They are not very big, but super light I should think...