Mot

[SquirrellCook]

It’s a fine looking vehicle, you know that a ramp is not needed for an MOT if they have a pit.

 

[Bouydog]

Thank you, must admit I did not think of a pit good point.

 

[Nabsim]

It’s a fine looking vehicle, you know that a ramp is not needed for an MOT if they have a pit.

Which is very lucky as when I took mine to the usual place last month it wouldn’t lift my van. Was worried for a while til I thought what had been removed since last mot lol

 

[wildebus]

Ref the Tacho, you can never just remove the tacho if you don't want it - otherwise it would be way too easy for operators to abuse it.

I'm a little surprised the vehicle passed while the Speedo was non-functional (I am sure that is a requirement?)

 

[Nabsim]

Ref the Tacho, you can never just remove the tacho if you want it - otherwise it would be way too easy for operators to abuse it.

I'm a little surprised the vehicle passed while the Speedo was non-functional (I am sure that is a requirement?)

I know a Speedo had to be fitted but I don’t recall one ever being tested to work. It had to have mph on it but thus could even be painted on the glass

 

[mistericeman]

From the testing manual....

 

[Bouydog]

I did not realise until driving home after the test that the speedo was not working, the tester only drove it from the garage door to the ramp 20 yards or so. He did not seem concerned about the lack of mileage display and really no opportunity to test the speedo, either way a lucky break for me.

 

[trevskoda]

Mine is a teco but not reading correct speed as i changed the diff,i do use a satnav but would love to correct the speedo,no one at iveco seems to know how to set up the electronic beast.

 

[Bouydog]

Tacho calibration is what you need Trev, usually required after gearbox repairs to ensure correct speed reading.

 

[SquirrellCook]

Mine is a teco but not reading correct speed as i changed the diff,i do use a satnav but would love to correct the speedo,no one at iveco seems to know how to set up the electronic beast.

Have you tried to find a service centre for your Tacho rather than the truck? Being electronic it should be easy to calibrate. It's not like having to change the tacho gearbox like it used to be on older trucks.