Electric front seat

[Sprinter 1 cup]

Be best seat I found and drove for hours in, are in the Chrysler voyager . So now gone out and got a pair in the sprinter colors leather seat.
They dont fit sprinter chassis / box is 46cm sq and the voyager base is 17 inch ! I can weld that in.
But I need to get heated lower and upper pads to work and the memory electric positions to work , but how?
The air bag the seat belt tensioner and the uncliped belt warning are not needed on sprinter.
So a lot of dormant wire !. But I would like both heated seats to work. And memory's as there are 2 opition .

 

[SquirrellCook]

What you need is the cars wiring diagram.

 

[Squiffy]

I would think your on a loser with the position memory as I believe that is controlled by the Voyager ECU, and will not migrate to any ECU. Phil.

 

[SquirrellCook]

The seat must have an encoder for the position, sounds like a job for a Pi.

 

[Sprinter 1 cup]

Right gone to old cds this is a wire diagram of seat but im lost .
I now know it's 12v and 5v but the seat has memory's for seat and retractable side mirror.

 

[Sprinter 1 cup]

Full pictur3

 

[Sprinter 1 cup]

Im looking and the abriation are colour . Like LB/GY = light blue grey strip???.

 

[Sprinter 1 cup]

And this how do I translate these, Please

 

[wildebus]

Looks like a nightmare to get that fully working in the "wrong" vehicle

Enjoy!

 

[SquirrellCook]

Looks like a fun job to play with on the bench. At least it looks like it's got a stand alone controller.

 

[Sprinter 1 cup]

Got seat working up down front back so a start.

 

[Sprinter 1 cup]

Looks like a nightmare to get that fully working in the "wrong" vehicle

Enjoy!

Hay it was in the wrong vehicle, so a transplant was required. It's called recycling. Lol

 

[Sprinter 1 cup]

So now fitted but limted electrics