Carver cascade 2 water heater wiring

[T X]

Has anyone got an example of there Carver cascade 2 water heater installed?

Be really helpful if you can post a picture of how you've done it.

Thanks,
Mark.

 

[n brown]

not sure what you need to know,electrics,plumbing or gas ?

 

[T X]

The plumbing side, does it have a built in water pump or do I need to get one to put the cold water in?

 

[n brown]

no,you'll need a pump
cold water into the lower pipe,hot from the top. the cold inlet has a small pipe and tap for draining in winter,freezing will kill the heater !

 

[T X]

When the hot water is ready would there need to be another pump to go to the shower or should the pump pushing the cold water do it?

 

[mikejay]

One pump as it pushes cold in the hot comes out. You can have a system were the pump pressurises the system up then as you open the tap or shower it kicks in or a switch or micro switched taps that turn the pump on as you open a tap.

Mike

 

[bru]

only 1 pump, pump cold water in which pushes hot out

 

[n brown]

this would be the ideal pump for a pressurised system,if you want to go that way. it can be mounted above or below the water tank,and has a switch that operates when any tap is turned on SHURFLO 20psi Trailking Water Pump 12v - Caravan / Motorhome 2095- 204-412 | eBay
or you can use a drop in pump and microswitched taps,or just have a switch you operate yourself.if any of this needs explaining-just ask