Search results

In which case Tookey you'll need more than a hand drill, probably at least a 10 ton trolly/bottle jack plus an array of spanners and sockets relevant to your van suspension, to include a versatile and sturdy ball joint splitter along with a Birmingham screw driver ( Big hammer) 😁 Phil.

Bloody hell, what do you guys do when your away, I've been motorhoming for near on 25 years and never had the need for a drill or jigsaw for that matter. I take a screw driver a couple of relevant size spanners and my handyman Swiss army knife, digital meter oh and a small hammer, anything that...

Cobolt in my view are a standard drill bit I have no argument with that but all this double point cutting bits that are almost impossible to reface properly are ali Ridculously priced and do no more than any standard drill does if correctly sharpened. Phil

It must be my age problem 🙄

I've always found that a correctly sharpened hardened steel drill bit did what I required, without paying copious amounts of money for a difficult to sharpened multipoint money pit 😄. Phil

😄😄 my thoughts exactly Phil but I did not want to seem inept 😆. Phil

Well Tookey, I have used manual drills on many occasions in my life and never had a problem, the main thing to remember is that the drill bit is sharp and the sharpening is done at the correct angle if this is done correctly then very little pressure is required to drill through most materials...

Looked earlier but somehow missed it 🙄

Good evening good people, in the past I have supplied folk with the pdf file for Ducato conversions the genuine Fiat pdf, and would you believe just when I need it I've changed my phone and none of my Arcobat reader files copied across to my new phone and I can't find any of them on the cloud...

I had leak in my yacht side window years ago, and I bought some of captn Tollys, your meant to drip it on where the leak is and it self seeks and seals the leak, it was totally useless in my case as after several tries it didn't stop a drop getting in, in the end I had to remove the window and...

A truly wonderful build, my conclusion though would be price of build materials ( The aluminium extrusion in America is probably cheap in comparison to the UK), and build weight, I don't know but maybe in America the vehicle weight limits are not as strict as in Europe one other thing I noted is...

Well if you think about it Nab you first of all have to purchase the steel and even that's not cheap now a days, round or square section you would be surprised I think how much steel section you would need to construct it properly, say the steel cost £30 and most fabricaters charge on average...

Yes you can but most folk haven't got the welding equipment available or indeed the correct skill to weld it up safely, and paying someone else to do would be pricey to say the least 😏. Phil

Well, the new android radio arrived from ebay, the last three days have been hell, first thing was when I plugged the radio into the Ducato loom with the special can bus module attached the the dashboard lit up and when I turned the ignition off it did not turn off even with the key pulled out...

Phil, I've been bar b queuing with an orange flexi gas pipe that's been out in the elements for 6 or 7 years it's now no longer orange because of the UV and cracking on the surface, however the rubber internal bore is fine, obviously I wouldn't use this state of pipe in an enclosed environment...

I'm sure that your correct, my son had to do a massive search for a swivelling double seat for his van, so the fact that it has a swivel is a great plus.🙂. Phil

I had the same problem in the end I actually gave it to a young couple from Bristol. Phil

Rec it's been sometime since I fitted two single swivel seats into my 2014 Ducato, but I do remember that initially I was disappointed by the fact that it seemed to be a high driving position but I soon got used to it and now do not even think about it.what I did note was the cost of a single...

Haven't heard that ad expression since the 70s 😄Phil Just remembered the credit card name "Access"

Agreed, I also keep them for mixing 2 pack epoxy glue and as a filler spreader, but in the case of removing these Ducato radios because they are such a tight fit you need something thin but strong and does not bend easily 🙂. Phil