Squiffy's latest activity

This weekend we are off as a family en convoy to a C+C rally in Cheddar and as the daughters new van has reached the 90k mark and is...

Yeah right.

Thanks Phil, to be honest I only put the photos up because I'd started the thread and thought I should show the finished product. But...

Thanks Mates, I have convinced myself that this really will be the last. Phil

I know I stopped posting about my daughters van build but I thought I'd post some photos of the finished article. My daughter on site...

As I said there is always a reason, glad you finally sorted it. Phil Very odd though as the two 155s that I have installed in the past...

Just as thought do the other lights extinguish when the power button is pressed off? It could be if they do but the touch sense lights...

I think you will have to do as I suggested in cutting the slate wire close to the unit, that way you know for sure that there is no...

When you say you re earthed it, are you saying that there was a short to earth then?

Ok change the fuse and get your multi meter and check the slate wire with it, disconnect all lights, if poss cut the slate wire close...

If it's blown a fuse it must be earthing out between the unit and the lights I'd have thought.

Is this a secondhand unit? Did you have the wiring all ready set up to the 12volt multi plug and all you had to do was plug in the...

Are the touch sense lights the only lights you have fitted? It is odd that when you press the power button on the 155 unit that should...

2 possibilities. 1) are your touch sense led lights pos/ neg sensertive ( Some led lights can be wired up either way round and others...