Search results

I think they really help ;) :)

What a great idea Trev ;)

Because both surfaces aren't perfectly flat I personally wouldn't use contact adhesive because it'll only stick in the odd places that it touches. As you say you need something that'll fill the slight gaps (to avoid a void) but doesn't cost a fortune because you're going to need quiet a bit of...

Well Puds wanted to keep it cheap, he's probably not replied to your post cos he collapsed when he opened that link to a £200 B2B😧. Probably wouldn't work anyway as more than 24v needed to charge a 24v battery unless he buys a 2nd mttp charger for the job.(more fainting) I've actually had Flexi...

Yep, that's what your looking for(y)

Genuine MPPT controllers sometimes emit a faint high pitched whistle/whine too.

I've no idea mate, all I know is a lot of cheap solar controlers are advertised as MPPT but in reality they aren't. Open it up and if it's got a large coil inside then it's legit. Merl

When I say 12v solar panels I'm referring to solar panels that would typically be used on a 12v solar system such as puds'...

A 12v panel charging 24v battery via a cheapo charge controller....really? Surely a charger employing buck voltage boost would be needed and I expect they come cheap but I could be wrong, (as SWIMBO will confirm I'm sure):unsure: Merl

Remember you may not need to go all the way back to your Hab battery to get it's power. Depending on the cable sizes you used during fitout you can possibly get it at your split charger, power/fuse panel, or solar charger. Merl

Forget about 12v to 24 volt charger, way too complicated and if you can find one it'll cost you, stick with using the inverter and a mains charger. Can you find the Ah capacity of the scooter battery? I suggest choosing a charger of around 30% and not exceeding 50% of the Ah rate so if your...

you going for the 4A mains charger?

If you hardwire stuff in now and you find that it still doesn't fulfil your needs you'll be re-doing it again mate. 😩

But you've got that control over charging already by using the fag lighter output mate. Why would using a relay in the way you describe improve your charging capability?

The amount of solar charge going to the cab batt won't be reliable, so best to stick with coming off the habitation bat if needs be. Much easier to use longer cabling off of your hab batt than working around discharging your cab batt accidentally. Merl.

Ok so you could use the 4A charger I linked to previously and if that still falls short we could explore wiring the inverter/4A charger off of your leisure batt instead so you can take advantage of the stored energy there and your solar input. Merl

Depends what you are trying to achieve? Your current setup is basically free and works so suck it and see for a while, time will tell you where your system falls short and needs improvement and hence which direction to take going forward. Good luck 👍

FFS, this is getting like an episode of one foot in the grave:ROFLMAO: Green lights mean good. Red light on the inverter means bad Red light on the charger means good Like I said, everything is working fine! Don't worry about blowing a fuse (or anything else) by connecting things together in...