Search results

Far more easy to have this like me,mains change over with warning led on incoming cable before fuse box.

Get a old caravan gas indirect heater,the exhaust is under the van so no nasty burnt gas to kill you,can be bought from £25 up and use no lecy.

At the moment i have a cheepo in use pumping out 14.7v and working well,but think the vectron will be in place soon.

Loads on ebay

The cheap £10 controlers are no good as they are not mppt,vectron will turn the excess voltage into amps to fill battery,with such a lage solar panel at least two or three 95 or 110 ah batterys will be required to soak up all that current. this unit will also put one ah into starter batter.

White st foam was banned many years back in home construction,but i fear no legal force to stop it being used in vans,but if you said i want or they said we use kingspan then you have them by the b--ls

one from china ebay 25 bucks,working over 5 years no bother

Looks good,biggest problem will be the single glass windows losing heat and condensation,keep us up to date with picys,best of luck with build.

This one works on mine

Looks nice but heavy build with that type of wood,she will more fuel,i would have went with light board or the plastic bathroom panels,your choice and health to wear.

Buy a ex library bus as they are cheap and the correct length,many can be bought with very low miles on clock. This one is for sale here in ulster for very little £12.000

Plastic bathroom panels are light and easy to clean

Think i would have went with light ply riveted up and covered with carpet.

Some say there proud to be merkins.

Think they would be better shot blasting the chassis on that bus first.

Correct for h/lights but side/parking and breaking they are miles ahead,my van and cars all changed over years back because when slamming down tail gate filliments were knocked out on old type bulbs. Also all inside lights should be led soft type.

When and if you upgrade do fill led bulbs to parking tail and brake lights as they dond give the old trouble of hard filaments breaking,also do all inside lights as well.

Lots of surface mount led lights on ebay or in fact any light which will take a standard car single element bulb can be fitted with a led one from ebay both soft or pure white,soft is my option.

Laptops work of a up voltage buck which plugs into cigy socket and uses much less than a inverter,but ok if going to use 230v coffee makers then fine,you only require a pure s/w inverter for some electronics , motors in fridges or kettles etc will work on any old inverter,do try and buy a soft...

Why do you require a inverter unless like me im fitting a small compressor fridge which i have tested and runs fine on a 500w soft start mod sine wave from ebay using almost nout on standby